LED Products Fully Autonomous
Our fully autonomous LED products are equipped with various sensors and can communicate with other light sources. Due to the high quality construction, the efficient LED chips and the constantly developing software, this product family is by far the most effective of our product range. In addition to the lighting which is actually adapted to the needs, the very easy installation and maintenance and the enormous possibilities to save electricity consumption, it will also be possible in the future to replace entire security systems, optimize ventilation systems etc. based on the collected data.
In contrast to the semi-autonomous products, the fully autonomous products replace not only motion detectors and light switches, but also the Dali lighting control. Thus, the fully autonomous LED lighting also enables a significantly longer service life due to a short operating time and high quality workmanship. In addition, the fully autonomous products also enable decentralised control and data evaluation.
Input voltage: | 100 – 240 VAC |
Battery Operation: | 190 – 240 VDC |
Operating frequency: | 50 – 60 Hz |
Power factor: | 0.92 |
Peak voltage resistance: | 300 VACrms |
Electronic ballast compatible: | No |
Form: | T8 |
Socket: | G5 / G13 |
Rotatable Socket: | Yes |
Material: | Al / PC / PE |
Cooling system: | Passive / 235 W/(mK) |
Cover: | Satin |
Colour temperature: | 3000 – 6000 K |
Colour rendering index: | 80 – 95 |
Colour Consistency (Mac Adam): | 3 |
Flicker Metric (Pst LM): | 0.03 |
Stroboscopic effect metric (SVM): | 0.02 |
UGR (4H/8H; 70/50/20) (per/par): | <27.8/ <25 |
System efficiency *: | 147 lm/W |
Energy Class: | D |
Number of switching cycles: | > 500’000 |
Service Life (L70B10): | 70’000 h |
IP Protection class: | IP20 |
Protection class: | II |
Risk group LED: | RG0 |
Operating temperature: | –20 °C .. +45 °C |
Storage temperature: | –20 °C .. +70 °C |
Operating & storage humidity: | 10 – 80 % rH |
Motion sensor technology: | Radar (HF) |
Motion transmission power: | < 1mW |
Motion sensor frequency: | 5.80 GHz |
Motion detection range: | 10m |
Adjustable detection range: | Yes |
Communication technology: | Bluetooth |
Communication transmission power: | 2.5mW |
Communication frequency: | 2.4 GHz |
Communication range: | max. 8 – 12m |
Active time settings: | 1s-4h |
Soft light start: | Yes |
Basic light function: | Yes |
Basic light settings: | 0-100% / 1% step |
Daylight control: | Yes |
Group parameterization: | Yes |
Swarm intelligence: | Yes |
Remote Access: | Yes |
Available Variants
* Power and luminous flux are subject to initial tolerances of +/- 5%. Unless specified otherwise, they are measured as follows: Colour temperature of 4000K, CRI of <80 and Environmental temperature of 25°C.
Dolder
ZHdK
Zürcher Hochschule der Künste
92 % less power consumption thanks to simple changeover.

Request a quote

Our offer to you
Test our lighting solutions on your premises for 21 days absolutely free of charge: Order between 25 and 100 LED tubes. If the high expectations of our product are not met, we will take them back after the 21 days.
However, if we can convince you of our offer during this 21-day test phase, we will offer you the already installed products of the pilot project at half price.
Give us a call: +41 44 500 73 85
NA
Non-Autonomous
Learn more about our extremely efficient and high quality non-autonomous products.
SA
Semi-Autonomous
Learn more about our sensor-controlled semi-autonomous products and see the incredible savings potential for yourself.
SA+
Semi-Autonomous Plus
Find out exactly what “Semi-autonomous Plus” means and how it differs from “Semi-autonomous” degree of autonomy.
FA
Fully Autonomous
What are the ideal applications for fully autonomous lamps and luminaires? How do they differ from the less autonomous products?