LED Products Non-autonomous
The non-autonomous LED products know how to impress with their high-quality construction with a cooling aluminium housing and high light output. They are the cost-effective replacement for conventional FL tubes and normal luminaires. After minor modifications, the tubes can be used in existing sockets without problems.
|Input voltage:||100 – 240 VAC|
|Battery Operation:||190 – 240 VDC|
|Operating frequency:||50 – 60 Hz|
|Peak voltage resistance:||300 VACrms|
|Electronic ballast compatible:||No|
|Socket:||G5 / G13|
|Material:||Al / PC / PE|
|Cooling system:||Passive / 235 W/(mK)|
|Colour temperature:||3000 – 6000 K|
|Colour rendering index:||80 – 95|
|Colour Consistency (Mac Adam):||3|
|Flicker Metric (Pst LM):||0.01|
|Stroboscopic effect metric (SVM):||0.01|
|UGR (4H/8H; 70/50/20) (per/par):||<27.6/ <25|
|System efficiency *:||145 lm/W|
|Number of switching cycles:||> 500’000|
|Service Life (L70B10):||50’000 h|
|IP Protection class:||IP20|
|Risk group LED:||RG0|
|Operating temperature:||–20 °C .. +45 °C|
|Storage temperature:||–20 °C .. +70 °C|
|Operating & storage humidity:||10 – 80 % rH|
|Motion sensor technology:||–|
|Motion transmission power:||–|
|Motion sensor frequency:||–|
|Motion detection range:||–|
|Adjustable detection range:||–|
|Communication transmission power:||–|
|Active time settings:||–|
|Soft light start:||No|
|Basic light function:||No|
|Basic light settings:||No|
* Power and luminous flux are subject to initial tolerances of +/- 5%. Unless specified otherwise, they are
measured as follows: Colour temperature of 4000K, CRI of <80 and Environmental temperature of 25°C.
The Dolder Grand
How the Zurich luxury hotel saves CHF 50,000 a year.
Zürcher Hochschule der Künste
92 % less power consumption thanks to simple changeover.
Where an inexpensive and energy-efficient solution is required, our non-autonomous tubes are ideal.
For cost-efficient use with external switching options.
Kitchen & Bath
Controllable with button, motion detector, and presence detector or timer.
Request a quote
Our offer to you
Test our lighting solutions on your premises for 21 days absolutely free of charge: Order between 25 and 100 LED tubes. If the high expectations of our product are not met, we will take them back after the 21 days.
However, if we can convince you of our offer during this 21-day test phase, we will offer you the already installed products of the pilot project at half price.
Give us a call: +41 44 500 73 85
Learn more about our extremely efficient and high quality non-autonomous products.
Learn more about our sensor-controlled semi-autonomous products and see the incredible savings potential for yourself.
Find out exactly what “Semi-autonomous Plus” means and how it differs from “Semi-autonomous” degree of autonomy.
What are the ideal applications for fully autonomous lamps and luminaires? How do they differ from the less autonomous products?